The Sims 3 Roaring Heights: DIY Roller Coaster!

31
14760
- Advertisement -

Via SimGuruTaterTot

The Sims 3 Roaring Heights comes out NEXT Thursday, December 12, 2013 along with the Boardwalk Venue and the much anticipated Sky High Roller Coaster! As some of you may know already, this is a one of a kind, DIY Rollercoaster! Designer Alan Copeland, @SimGuruCopeland, is here to walk you through how to build your own roller coaster! Be sure to follow him on Twitter @SimGuruCopeland and give him a big thanks for such an amazing blog!
 
Hi everybody! Are you excited about Roaring Heights and the new Boardwalk Venue? Aren’t those Roller Coasters something else?
 

venue_1_ry (1) venue_2_ey_blog (1)

 

 
 
Today’s blog is going to be a little different from some of the other blogs I’ve done in the past. With the new Boardwalk Venue coming out with Roaring Heights there have been plenty of cool screenshots and information about the Sky High Roller Coaster, so instead of just giving more of those, I thought you might enjoy a tutorial on how to assemble a roller coaster of your own.
 
This example uses all of the new track pieces and most of the columns and other goodness that come with the set.
 

Advertisement

venue_3_ey_blog_hex (1)

 
First, let’s take a look at what we hope to build.
 

venue_4_hex_ey (1)

 
You’ll notice that this is very similar to the big roller coaster in the venue if you remove all of the buildings and other venue stuff.
 
One of the biggest challenges to making a roller coaster is space, so after a few tries you may find yourself counting out the squares the way I do. (NOTE: All track pieces are divisible by 6.)
 
I started out with a simple box midway up the side of the lot for my loading and unloading pad. (Although you could easily just have it start on the ground.)
 

venue_5_blog_ey_nj (2)

 
Then I placed the starting piece. You’ll want to make sure it has enough space on both sides so that the Sims can load and unload. As long as the ride isn’t in use, Sims can walk behind the cart on this piece only.
 

venue_5_blog_ey_nj (2)

 
I put single story “stacked” columns under each side just to make it look better.
 

venue_6_ac_blog (1)

 
Then let’s grab a cart and place it. This is a really easy way to see which direction your coaster will be going but you’ll also notice that some of the pieces have arrows on the end of them if they only go in one direction.
 

Advertisement

venue_8_note_ac (1)

 
(NOTE: Some pieces, like straight pieces, up/down pieces and curves can be placed in either direction and they work just fine.)
 

venue_9_ye_blog

 
Right away I want to do a level transition, so let’s place a two story single column about 6 spaces away.
 

venue_10_10

 
Then we add an up/down piece on top of it.
 

venue_11_venue_blog

 
Let’s grab a two story curved stacked column and place it right next to this. (NOTE: you can also use individual columns if you don’t like the stacked look.)
 

Advertisement

venue_12_blog_ac

 
This makes it super easy to both lay out where you’re turn will be and give you support of placing your curve.
 

venue_13_blog_ye

 
Now let’s do a straight piece. We can grab a stacked straight column and place a straight piece on top of it so it looks like this:
 

venue_15_h_blog venue_14_hi_there

 
Let’s go up another floor. Just like before we want to go with a column that’s one story higher than we are at right now (so in this case 3 story) and place it 6 squares away. The grab an up/down piece and place it on top so it connects with our track.
 

Advertisement

venue_16_x_blog

 
Next we want to do the loop. So we want to put a couple of supports down. Loops are pretty big, so I usually put a bunch down and then delete those that I don’t need.
 

venue_17_ye_blog

 
Then just grab the loop and put it on top. This is a “one way” piece, so make sure you have the arrows going in the right direction.
 

venue_18_blog_rc

 
Now let’s go up another floor. Since columns can only go up three floors this time we’re going to stack a one story column on top of a three story column, six squares away. Then place your up/down piece.
 

Advertisement

venue_19_rc_blog

 
We are getting close to the edge of the lot, so let’s do the same thing with the curved columns and put a turn on top.
 

venue_20_blog_rc

 
Rinse and repeat so you get something like this:
 

venue_21_coaster

 
Now for the big hump. Like the loop this is pretty big, so if you’d like you can put a bunch of columns down in a straight line and we will just delete what we don’t want once we have the hump in place.
 

venue_22_rc_blog_ye venue_23_how_blog

 
That’s looking super impressive, but I think it’s about time for some of the really cool theme pieces. We are going to need a lot of room for those, so let’s use the techniques we’ve already learned to put in another turn and an up/down piece so it looks a little something like this:
 

Advertisement

venue_24_blog_roller

 
Great! Now let’s give the Sims a real thrill with the 3 story Dead Man’s Drop. You’re going to place this on the ground and line it up so it attaches to the end of the track, like so.
 

venue_25_coaster_blog_image

 
Next, place a Geyser Run. Make sure you’re track arrow is going in the right direction.
 

venue_26_image_blog

 
Now put in a Broken Track piece.
 

venue_27

 
We want to loop this back into the start piece, so place two curve tracks so it looks like this:
 

venue_28_rc_ac

 
To finish the coaster you can put in a straight piece and an up/down piece in any order.
 

Advertisement

venue_29_ac_rc_b venue_30_30

 
In LIVE mode you can check to make sure the track is valid, which should highlight all of the pieces that are attached to each other. Hopefully the whole thing should light up as green for a few seconds. Any part that isn’t lit up isn’t lined up correctly.
 
You can garnish the track with lots of cool things like balloons and flags.
 
In LIVE mode you can also set the theme between Thrill, Haunted or Wonder. This will change the color of the lights on the side of the track, the animation and effects on some of the pieces, and the type of moodlet Sims get from riding the coaster. You can set your own texture style on all of the pieces as well.
 

venue_31_how_l venue_32_image venue_33_howto

 
I’m super excited to see all of the incredibly cool coasters you all come up with. A couple of team members should be posting some of their more over-the-top coasters on the Exchange. SimGuruKelly has a pretty awesome floating coaster I’ll try and get him to share.
 
The Sky High Roller Coaster comes exclusively with the Boardwalk venue, releasing December 12, 2013!

 

Advertisement